"Untitled Post" - Views: 110 · Hits: 110 - Type: Unlisted

<6>[    0.000000] Booting Linux on physical CPU 0

<6>[    0.000000] Initializing cgroup subsys cpu

<5>[    0.000000] Linux version 3.4.0-perf (root@scl-xa123) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 17 13:58:56 CST 2013

<4>[    0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d

<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

<4>[    0.000000] Machine: QCT MSM8625 SURF

<4>[    0.000000] wangminrong lcd_id_type is 8


<6>[    0.000000] memory pool 3 (start 29700000 size 3800000) initialized

<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc

<1>[    0.000000] Initialized strongly ordered page successfully

<3>[    0.000000] smem_find(137, 80): wrong size 64

<3>[    0.000000] smem_find(137, 72): wrong size 64

<6>[    0.000000] socinfo_init: v4, id=127, ver=1.0, raw_id=1907, raw_ver=0, hw_plat=2, hw_plat_ver=65541

<6>[    0.000000] L310 cache controller enabled

<6>[    0.000000] l2x0: 8 ways, CACHE_ID 0x410054c8, AUX_CTRL 0x30d60000, Cache size: 524288 B

<6>[    0.000000] Prfetch Ctrl: 0x74800003

<7>[    0.000000] On node 0 totalpages: 103677

<7>[    0.000000] free_area_init_node: node 0, pgdat c0937900, node_mem_map c11e0000

<7>[    0.000000]   Normal zone: 1434 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 102243 pages, LIFO batch:31

<6>[    0.000000] allocating 4976640 bytes at c1780000 (1980000 physical) for fb

<6>[    0.000000] Initialized persistent memory from 2ff05000-2fffffff

<6>[    0.000000] PERCPU: Embedded 9 pages/cpu @c1c42000 s14784 r8192 d13888 u36864

<7>[    0.000000] pcpu-alloc: s14784 r8192 d13888 u36864 alloc=9*4096

<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 102243

<5>[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=qcom vmalloc=200M androidboot.emmc=true androidboot.serialno=41370169 lcd_type=0x8 boot_reason=058 androidboot.baseband=msm

<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.000000] Memory: 250MB 0MB 0MB 1MB 151MB = 404MB total

<5>[    0.000000] Memory: 392220k/392220k available, 79844k reserved, 0K highmem

<5>[    0.000000] Virtual kernel memory layout:

<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

<5>[    0.000000]     vmalloc : 0xdd000000 - 0xff000000   ( 544 MB)

<5>[    0.000000]     lowmem  : 0xc0000000 - 0xdcd00000   ( 461 MB)

<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

<5>[    0.000000]       .text : 0xc0008000 - 0xc0847c80   (8448 kB)

<5>[    0.000000]       .init : 0xc0848000 - 0xc087e9c0   ( 219 kB)

<5>[    0.000000]       .data : 0xc0880000 - 0xc0955ee0   ( 856 kB)

<5>[    0.000000]        .bss : 0xc0955f04 - 0xc0b35ae4   (1919 kB)

<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

<6>[    0.000000] Preemptible hierarchical RCU implementation.

<6>[    0.000000] NR_IRQS:645

<6>[    0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms

<6>[    0.000000] Console: colour dummy device 80x30

<6>[    0.000201] Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992)

<6>[    0.070086] pid_max: default: 32768 minimum: 301

<6>[    0.070588] Mount-cache hash table entries: 512

<6>[    0.072276] Initializing cgroup subsys cpuacct

<6>[    0.072298] Initializing cgroup subsys devices

<6>[    0.072314] Initializing cgroup subsys freezer

<6>[    0.072368] CPU: Testing write buffer coherency: ok

<6>[    0.072648] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

<6>[    0.072724] hw perfevents: enabled with ARMv7 Cortex-A5 PMU driver, 3 counters available

<6>[    0.072858] Setting up static identity map for 0x7c66f8 - 0x7c675c

<6>[    0.074199] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

<6>[    0.074286] Brought up 2 CPUs

<6>[    0.074308] SMP: Total of 2 processors activated (597.19 BogoMIPS).

<6>[    0.080531] dummy: 

<6>[    0.081008] NET: Registered protocol family 16

<6>[    0.082478] gpiochip_add: registered GPIOs 0 to 15 on device: generic

<6>[    0.082578] gpiochip_add: registered GPIOs 16 to 42 on device: generic

<6>[    0.082676] gpiochip_add: registered GPIOs 43 to 67 on device: generic

<6>[    0.082773] gpiochip_add: registered GPIOs 68 to 94 on device: generic

<6>[    0.082891] gpiochip_add: registered GPIOs 95 to 106 on device: generic

<6>[    0.082989] gpiochip_add: registered GPIOs 107 to 132 on device: generic

<6>[    0.083974] Shared PLL control available.

<6>[    0.087666] acpuclk_7627_probe()

<6>[    0.087716] Dynamic reprogramming is ON

<6>[    0.088763] ACPU running at 600000 KHz

<6>[    0.088784] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4

<6>[    0.088814]  0   19200   5   1    2400    4   30720 -1 -1 -1 -1  3  1  4 -1

<6>[    0.088843]  1  245760   1   1   30720    4   61440 -1 -1 -1 -1  3 -1  4  5

<6>[    0.088871]  2  320000   0   3   40000    4  122880 -1  1 -1 -1  3 -1  4  5

<6>[    0.088901]  3  480000   0   2   60000    4  122880  2  1 -1 -1 -1 -1  4  6

<6>[    0.088929]  4  600000   2   2   75000    4  160000  2  1 -1 -1 -1 -1 -1  7

<6>[    0.088958]  5  700800   4   1   87500    4  160000  2  1  4 -1 -1 -1 -1  7

<6>[    0.088986]  6 1008000   4   1  126000    4  200000  3 -1  4  5 -1 -1 -1  7

<6>[    0.089016]  7 1152000   4   1  151200    4  200000 -1 -1  4  5 -1 -1 -1 -1

<6>[    0.089036] CPU0: 6 scaling frequencies supported.

<6>[    0.089051] CPU1: 6 scaling frequencies supported.

<6>[    0.089374] smps1: 1100 mV normal 

<6>[    0.089644] smps2: 1100 mV normal 

<6>[    0.089921] smps3: 1800 mV normal 

<6>[    0.090239] smps4: 2100 mV normal 

<6>[    0.090519] ldo01: 1800 <--> 2850 mV normal 

<6>[    0.090761] ldo02: 2850 mV normal 

<6>[    0.091029] ldo03: 1200 mV normal 

<6>[    0.091298] ldo04: 1100 mV normal 

<6>[    0.091574] ldo05: 1300 <--> 1350 mV normal 

<6>[    0.091836] ldo06: 1200 mV normal 

<6>[    0.092118] ldo07: 2600 mV normal 

<6>[    0.092379] ldo08: 2850 mV normal 

<6>[    0.092661] ldo09: 1800 mV normal 

<6>[    0.092938] ldo10: 1800 <--> 3000 mV normal 

<6>[    0.093206] ldo11: 1800 mV normal 

<6>[    0.093478] ldo12: 2850 mV normal 

<6>[    0.093758] ldo13: 2850 mV normal 

<6>[    0.094019] ldo14: 3300 mV normal 

<6>[    0.094284] ldo15: 1800 <--> 2850 mV normal 

<6>[    0.094589] ldo16: 1800 <--> 2850 mV normal 

<6>[    0.094863] ldo17: 2900 <--> 3300 mV normal 

<6>[    0.095149] ldo18: 2700 mV normal 

<6>[    0.095516] ldo19: 2800 <--> 3050 mV normal 

<6>[    0.095826] ncp: 1800 mV normal 

<6>[    0.097514] persistent_ram: found existing buffer, size 34911, start 34911

<6>[    0.251013] console [ram-1] enabled

<6>[    0.252661] fanjiankang before ath6kl_readCalDataFromNV

<6>[    0.252671]  

<6>[    0.253084] fanjiankang before msm_proc_comm

<6>[    0.253093]  

<6>[    0.254009] ath6kl_readCalDataFromNV ret value is -5

<6>[    0.254428] [WIFI]_read RF NV item 3757 failed i = 0

<6>[    0.254581] fanjiankang after ath6kl_readCalDataFromNV

<6>[    0.254589]  

<6>[    0.254998] zte_wifi_init() enter

<4>[    0.255391] PCOM_CUSTOMER_CMD3 send/n

<6>[    0.305931] zte_wifi_init() VREG 1.8v On

<6>[    0.406046] zte_wifi_init() Pull low CHIP PWD

<4>[    0.407231] Read wifi mac address form nv successful!

<4>[    0.407393] data1=152f8b6c,data2=ed91

<4>[    0.407671] quguotao MAC = 6C:8B:2F:15:91:ED

<4>[    0.407846] goes to create_wlan_info_proc_file

<4>[    0.408853] smps3: Failed to create debugfs directory

<4>[    0.409206] wangminrong 3333


<4>[    0.410411] [ZGC]:init_bt_proc

<3>[    0.410581] msm7627a_camera_init Entered

<6>[    0.411596] regulator_bulk_enabled ++++++++++++++

<4>[    0.412353] smps3: Failed to create debugfs directory

<4>[    0.412634] vreg_disable: unbalanced disables for vreg msme1

<6>[    0.922044] msm_init_pmic_vibrator

<4>[    0.922356] ldo17: Failed to create debugfs directory

<3>[    0.922654] ldo17: requested voltage range [2850000, 2850000] does not fit within constraints: [2900000, 3300000]

<3>[    0.922943] sensor_power_init: set regulator level failed with :(-22)

<7>[    0.923476] gpio_export: gpio41 status -22

<7>[    0.923494] gpio_export: gpio26 status -22

<7>[    0.923513] gpio_export: gpio40 status -22

<6>[    0.929544] fs_gfx3d: normal 

<6>[    0.952954] bio: create slab <bio-0> at 0

<3>[    0.953801] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:66

<3>[    0.954116] qup_i2c qup_i2c.0: I2C slave addr:0x22 not connected

<4>[    0.954294] sx150x 0-0022: i2c write fail: can't write 01 to 10: -107

<4>[    0.954589] sx150x: probe of 0-0022 failed with error -107

<6>[    0.955143] ION heap vmalloc created

<6>[    0.955474] ION heap camera_preview created at 29700000 with size 1200000

<6>[    0.955663] ION heap audio created at 2a900000 with size 22e000

<6>[    0.956009] ION heap sf created at 2ab2e000 with size 2300000

<5>[    0.956659] SCSI subsystem initialized

<6>[    0.957173] usbcore: registered new interface driver usbfs

<6>[    0.957571] usbcore: registered new interface driver hub

<6>[    0.957903] usbcore: registered new device driver usb

<6>[    0.958303] Linux media interface: v0.10

<6>[    0.958531] Linux video capture interface: v2.00

<6>[    0.959218] Advanced Linux Sound Architecture Driver Version 1.0.25.

<6>[    0.960196] Bluetooth: Core ver 2.16

<6>[    0.960411] NET: Registered protocol family 31

<6>[    0.960703] Bluetooth: HCI device and connection manager initialized

<6>[    0.960871] Bluetooth: HCI socket layer initialized

<6>[    0.961153] Bluetooth: L2CAP socket layer initialized

<6>[    0.961571] Bluetooth: SCO socket layer initialized

<6>[    0.962743] Switching to clocksource dg_timer

<6>[    0.998619] NET: Registered protocol family 2

<6>[    0.999299] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

<6>[    1.000201] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

<6>[    1.000886] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)

<6>[    1.001483] TCP: Hash tables configured (established 16384 bind 16384)

<6>[    1.001776] TCP: reno registered

<6>[    1.001941] UDP hash table entries: 256 (order: 1, 8192 bytes)

<6>[    1.002251] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

<6>[    1.003049] NET: Registered protocol family 1

<6>[    1.003699] Unpacking initramfs...

<6>[    1.177466] Freeing initrd memory: 1900K

<3>[    1.180188] Notify: smsm init

<4>[    1.180878] get_nand_partitions: no flash partition table in shared memory

<6>[    1.186546] rpcrouter_smd_remote_notify: smd opened 0x  (null)

<3>[    1.189993] rpcrouter: Server create rejected, version = 0, program = 3000003b

<1>[    1.191266] dma_test_init, minor number 36

<6>[    1.200908] __msm_rpc_connect: server not found 30000002:20001

<6>[    1.204538] rmt_storage_get_ramfs: RAMFS entry: addr = 0x2d0c0000, size = 0x00300000

<6>[    1.204833] rmt_storage_get_ramfs: RAMFS entry: addr = 0x2cfc0000, size = 0x00100000

<6>[    1.205349] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized

<6>[    1.408129] fuse init (API version 7.18)

<7>[    1.408871] yaffs: yaffs built Apr 17 2013 13:56:29 Installing.

<6>[    1.408929] msgmni has been set to 769

<4>[    1.409586] cryptomgr_test used greatest stack depth: 7112 bytes left

<6>[    1.411888] io scheduler noop registered

<6>[    1.412506] io scheduler cfq registered (default)

<6>[    1.414936] mipi_dsi base phy_addr = 0xa1100000 virt = 0xdd300000

<4>[    1.415781] wangminrong the lcd is video_wvga_pt


<6>[    1.416139] setting pdata->panel_info.fb_num to 3. type: 8

<6>[    1.416621] DSI_TWO_LANES

<4>[    1.417121] [ZGC]:init_lcd_proc

<6>[    1.422438] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!

<7>[    1.423219] Registered led device: lcd-backlight

<6>[    1.423869] msm_serial: detected port #0

<6>[    1.424163] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 41) is a MSM

<6>[    1.425084] msm_serial: driver initialized

<6>[    1.425846] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 77) is a MSM HS UART

<6>[    1.426483] msm_serial_hs module loaded

<6>[    1.426768] msm_serial_hsl: detected port #0

<6>[    1.427161] msm_serial_hsl.0: ttyHSL0 at MMIO 0xa0300000 (irq = 84) is a MSM

<6>[    1.427499] msm_serial_hsl: console setup on port #0

<6>[    2.433776] console [ttyHSL0] enabled

<6>[    2.437591] msm_serial_hsl: driver initialized

<6>[    2.443508] diagchar initialized now

<4>[    2.448431] dalrpc_rcv_DAL0 used greatest stack depth: 7032 bytes left

<6>[    2.454874] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU

<6>[    2.468573] loop: module loaded

<1>[    2.470931] pmem: pmem_setup: unable to register pmem driver(pmem) - zero size passed in!

<4>[    2.479193] android_pmem: probe of android_pmem.0 failed with error -1

<1>[    2.485571] pmem: pmem_setup: unable to register pmem driver(pmem_adsp) - zero size passed in!

<4>[    2.494258] android_pmem: probe of android_pmem.1 failed with error -1

<1>[    2.500758] pmem: pmem_setup: unable to register pmem driver(pmem_audio) - zero size passed in!

<4>[    2.509453] android_pmem: probe of android_pmem.2 failed with error -1

<6>[    2.516089] lis3dh_acc accelerometer driver: init

<6>[    2.520653] lis3dh_acc: probe start.

<3>[    2.524176] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:66

<3>[    2.530591] qup_i2c qup_i2c.0: I2C slave addr:0x19 not connected

<3>[    2.553071] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:66

<3>[    2.558863] qup_i2c qup_i2c.0: I2C slave addr:0x19 not connected

<3>[    2.583064] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:66

<3>[    2.588856] qup_i2c qup_i2c.0: I2C slave addr:0x19 not connected

<3>[    2.613059] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:66

<3>[    2.618849] qup_i2c qup_i2c.0: I2C slave addr:0x19 not connected

<3>[    2.643059] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:66

<3>[    2.648849] qup_i2c qup_i2c.0: I2C slave addr:0x19 not connected

<3>[    2.672988] lis3dh_acc 0-0019: read transfer error

<3>[    2.677016] lis3dh_acc 0-0019: Error reading WHO_AM_I: should be 0x33, read 0xf

<3>[    2.684211] lis3dh_acc: Driver Init failed

<4>[    2.688401] lis3dh_acc: probe of 0-0019 failed with error -5

<4>[    2.693986] i2c-core: driver [lis3dh_acc] using legacy suspend method

<4>[    2.700444] i2c-core: driver [lis3dh_acc] using legacy resume method

<6>[    2.706708] AKM8963 compass driver: initialize.

<6>[    2.711756] input: compass as /devices/virtual/input/input0

<6>[    2.717399] akm8963 0-000c: successfully probed.kxtik probe begin

<4>[    2.733276] kxtik reg WHO_AM_I is 0x5 after write reg 0x1d

<6>[    2.738373] input: zte_acc as /devices/i2c-0/0-000f/input/input1

<4>[    2.744414] smps3: Failed to create debugfs directory

<6>[    2.963251] Loading pn544 driver

<6>[    2.965758] pn544_probe

<6>[    2.968188] pn544_probe : requesting IRQ 297

<6>[    2.973411] SCSI Media Changer driver v0.25 

<6>[    2.978158] msm_nand_probe: phys addr 0xa0a00000 

<6>[    2.981979] msm_nand_probe: Dual Nand Ctrl in ping-pong mode

<6>[    2.987661] msm_nand_probe: dmac 0x7

<6>[    2.991333] msm_nand_probe: allocated dma buffer at ffdec000, dma_addr 28ba2000

<3>[    2.998704] flash_onfi_probe: No partition info available

<6>[    3.004209] status: 20

<6>[    3.006191] nandid: 0 maker 00 device 00

<3>[    3.010101] ERROR: unknown nand device manuf=0 devid=0

<6>[    3.015514] SFLASHC Async Mode bit: 0 

<6>[    3.019103] =================================================================

<6>[    3.026229] flash_onenand_probe: manufacturer_id = 0xf000

<6>[    3.031451] flash_onenand_probe: device_id = 0xf001

<6>[    3.036458] flash_onenand_probe: version_id = 0xf002

<6>[    3.041259] flash_onenand_probe: data_buf_size = 0xf003

<6>[    3.046619] flash_onenand_probe: boot_buf_size = 0xf004

<6>[    3.051678] flash_onenand_probe: num_of_buffers = 0xf005

<6>[    3.057119] flash_onenand_probe: technology = 0xf006

<6>[    3.061926] =================================================================

<6>[    3.069181] flash_onenand_probe: Detected an unsupported device

<3>[    3.074966] msm_nand_probe: No nand device found

<6>[    3.079874] tun: Universal TUN/TAP device driver, 1.6

<6>[    3.084613] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>

<6>[    3.091024] rmnet_init: SMD devices[8]

<6>[    3.101809] PPP generic driver version 2.4.2

<6>[    3.105444] PPP BSD Compression module registered

<6>[    3.110004] PPP Deflate Compression module registered

<4>[    3.117189] modprobe used greatest stack depth: 6196 bytes left

<6>[    3.124891] PPP MPPE Compression module registered

<6>[    3.128806] NET: Registered protocol family 24

<6>[    3.133446] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).

<6>[    3.140253] CSLIP: code copyright 1989 Regents of the University of California.

<7>[    3.147829] gpio_request: gpio-141 (i2c_host_vbus_en) status -22

<3>[    3.147849] failed to request 141 GPIO

<6>[    3.152323] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[    3.158333] host driver registered w/ tranceiver

<6>[    3.162803] usbcore: registered new interface driver cdc_acm

<6>[    3.168373] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

<6>[    3.176224] Initializing USB Mass Storage driver...

<6>[    3.181279] usbcore: registered new interface driver usb-storage

<6>[    3.187081] USB Mass Storage support registered.

<6>[    3.191843] usbcore: registered new interface driver ums-alauda

<6>[    3.197643] usbcore: registered new interface driver ums-cypress

<6>[    3.203756] usbcore: registered new interface driver ums-datafab

<6>[    3.209584] usbcore: registered new interface driver ums-freecom

<6>[    3.215734] usbcore: registered new interface driver ums-isd200

<6>[    3.221476] usbcore: registered new interface driver ums-jumpshot

<6>[    3.227706] usbcore: registered new interface driver ums-karma

<6>[    3.233399] usbcore: registered new interface driver ums-onetouch

<6>[    3.239564] usbcore: registered new interface driver ums-sddr09

<6>[    3.245378] usbcore: registered new interface driver ums-sddr55

<6>[    3.251388] usbcore: registered new interface driver ums-usbat

<6>[    3.257113] usbcore: registered new interface driver usb_ehset_test

<6>[    3.263994] peripheral driver registered w/ tranceiver

<6>[    3.269181] mbim_init: initialize 1 instances

<6>[    3.273038] mbim_init: Initialized 1 ports

<6>[    3.279541] android_usb gadget: Mass Storage Function, version: 2009/09/11

<6>[    3.285788] android_usb gadget: Number of LUNs=2

<6>[    3.290136]  lun0: LUN: removable file: (no medium)

<6>[    3.295156]  lun1: LUN: removable file: (no medium)

<6>[    3.300299] android_usb gadget: android_usb ready

<6>[    3.305718] rmi_bus_init: RMI Bus Driver Init

<7>[    3.309226] rmi_bus_init: registered bus.

<7>[    3.309393] rmi_sensor_init: RMI Sensor Init

<7>[    3.309408] rmi_function_init: RMI Function Init

<4>[    3.309511] i2c-core: driver [rmi4_ts] using legacy suspend method

<4>[    3.315391] i2c-core: driver [rmi4_ts] using legacy resume method

<4>[    3.321616] Fts_ts_probe: enter----

<4>[    3.343013] Fts_ts_probe: GPIO_TOUCH_RST_OUT(12) = 1

<4>[    3.652998] Fts_ts_probe: GPIO_TOUCH_EN_OUT(13) = 1

<3>[    3.657309] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75

<3>[    3.663663] qup_i2c qup_i2c.1: I2C slave addr:0x3e not connected

<3>[    3.669501] ft5x0x_ts 1-003e: Fts_i2c_read: FAILED, read 1 bytes from reg 0xA6

<6>[    3.676863] Fts_ts_probe: read FT5X0X_REG_FIRMID = 0x0.

<3>[    3.693109] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75

<3>[    3.698899] qup_i2c qup_i2c.1: I2C slave addr:0x3e not connected

<3>[    3.704774] ft5x0x_ts 1-003e: Fts_i2c_read: FAILED, read 1 bytes from reg 0xA6

<6>[    3.712066] Fts_ts_probe: read FT5X0X_REG_FIRMID = 0x0.

<6>[    3.723106] android_work: android_work: did not send uevent (0 0   (null))

<3>[    3.733109] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75

<3>[    3.738899] qup_i2c qup_i2c.1: I2C slave addr:0x3e not connected

<3>[    3.744778] ft5x0x_ts 1-003e: Fts_i2c_read: FAILED, read 1 bytes from reg 0xA6

<6>[    3.752064] Fts_ts_probe: read FT5X0X_REG_FIRMID = 0x0.

<4>[    3.773111] ft5x0x_ts: probe of 1-003e failed with error -1

<4>[    3.778181] ts_power_on: enter----

<4>[    3.792999] ts_power_on: GPIO_TOUCH_RST_OUT(12) = 1

<4>[    4.343043] ts_power_on: GPIO_TOUCH_EN_2V8_OUT(13) = 1

<4>[    4.347293] [TSP] probing for Synaptics RMI4 device synaptics-rmi-ts at $22...

<4>[    4.354658] [TSP] read from address 0xe9

<4>[    4.359299] [TSP] fd.functionNumber = 0x34

<4>[    4.362503] [TSP] fd.queryBase = 0x70

<4>[    4.366299] [TSP] fd.commandBase = 0x0

<4>[    4.369881] [TSP] fd.controlBase = 0x37

<4>[    4.373726] [TSP] fd.dataBase = 0x0

<4>[    4.377294] [TSP] fd.intSrc = 0x1

<4>[    4.377301] 

<4>[    4.381946] [TSP] read from address 0xe3

<4>[    4.386773] [TSP] fd.functionNumber = 0x1

<4>[    4.390011] [TSP] fd.queryBase = 0x79

<4>[    4.393563] [TSP] fd.commandBase = 0x6e

<4>[    4.397353] [TSP] fd.controlBase = 0x3b

<4>[    4.401303] [TSP] fd.dataBase = 0x13

<4>[    4.404759] [TSP] fd.intSrc = 0x1

<4>[    4.404766] 

<4>[    4.409624] [TSP] read from address 0xdd

<4>[    4.414333] [TSP] fd.functionNumber = 0x11

<4>[    4.417538] [TSP] fd.queryBase = 0x96

<4>[    4.421304] [TSP] fd.commandBase = 0x6f

<4>[    4.425031] [TSP] fd.controlBase = 0x40

<4>[    4.428821] [TSP] fd.dataBase = 0x15

<4>[    4.432501] [TSP] fd.intSrc = 0x21

<4>[    4.432508] 

<4>[    4.438896] 5 fingers

<4>[    4.441906] [TSP] max X: 1072; max Y: 1890

<4>[    4.445269] [TSP] ts->datalength:50; F01_DataOffset:0x13; F11_DataOffset:0x15; F19_DataOffset:0x0; F30_DataOffset:0x0;

<4>[    4.455816] [TSP] RMI4 $22 data read: $00 + 50

<4>[    4.460861] [TSP] firmware version: 0x1 0x1

<7>[    4.464423] [TSP] synaptics_rmi4_probe: Set ranges X=[0..1072] Y=[0..1740].

<6>[    4.464729] input: Synaptics RMI4 as /devices/virtual/input/input2

<4>[    4.470814] [TSP] synaptics input device registered

<4>[    4.475633] [TSP] synaptics_ts_probe: Start touchscreen Synaptics RMI4 in interrupt mode

<6>[    4.483684] ts_key_report_synaptics_init: virtual key init succeed!

<6>[    4.490139] GPIO Matrix Keypad Driver: Start keypad matrix for 7x27a_kp in interrupt mode

<6>[    4.498303] input: 7x27a_kp as /devices/virtual/input/input3

<3>[    4.504384] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75

<3>[    4.510081] qup_i2c qup_i2c.1: I2C slave addr:0x23 not connected

<3>[    4.516206] ltr558als 1-0023: ltr558_check_part_id: part id miscompare :should be 0x80, read 0xFFFFFF95

<3>[    4.525568] ltr558als 1-0023: ltr558_probe: Part ID Read Fail...

<4>[    4.531511] pm debug: alarm_driver_init enter

<4>[    4.535884] pm debug: alarm_driver_init

<4>[    4.539551] pm debug: alarm_driver_init

<4>[    4.543406] pm debug: alarm_driver_init

<4>[    4.547311] pm debug: alarm_driver_init

<4>[    4.551011] pm debug: alarm_driver_init

<6>[    4.557619] RPC CALL -- TOD TIME UPDATE: ttick = 381047

<6>[    4.557628] stamp=55257893884166144, freq = 402653184

<6>[    4.567416] process_cb_request: now=11638824462 sclk_max=131072000000000

<6>[    4.574179] using rtc device, msm_rtc, for alarms

<6>[    4.578231] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0

<6>[    4.585746] process_cb_request: state=0 tick_at_suspend=0

<6>[    4.591564] rs30000048 rs30000048.262144: setting system clock to 2013-05-30 14:52:19 UTC (1369925539)

<4>[    4.600499] [alarm] time sync from modem,fix_sync_alarm

<6>[    4.600649] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1

<6>[    4.600739] i2c /dev entries driver

<4>[    4.602481] msm_sensor_i2c_probe hi542_i2c_probe called

<4>[    4.602503] hi542_sensor_power_up: sensor name is hi542,chip_EN is GPIO 42,RESETB is 27

<4>[    4.602518] hi542_sensor_power_up:  PowerupFlag is 0

<4>[    4.615626] msm_sensor_power_up: 649

<3>[    4.643074] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:66

<3>[    4.648874] qup_i2c qup_i2c.0: I2C slave addr:0x20 not connected

<3>[    4.654868] msm_sensor_match_id: hi542: read id failed

<3>[    4.659826] msm_sensor_i2c_probe hi542_i2c_probe failed

<4>[    4.665181] hi542_sensor_power_down:start

<4>[    4.669024] msm_sensor_power_down

<3>[    4.672411] hi542_sensor_i2c_probe probe faild-------

<3>[    4.677511] hi542_release_gpio release gpio 42, 27

<4>[    4.682158] hi542: probe of 0-0020 failed with error -107

<4>[    4.687819] msm_sensor_i2c_probe ov5640_i2c_probe called

<4>[    4.692931] msm_sensor_power_up: 649

<4>[    4.773498] msm_sensor id: 0x56  0x56

<3>[    4.776419] msm_eeprom_probe probe_fail

<6>[    4.780568] msm_sensor_register mctl_node_name[0] = video1

<4>[    4.807033] msm_sensor_power_down

<3>[    4.809648] ov5640_sensor_i2c_probe probe OK+++++++++++

<7>[    4.814824] gpio_request: gpio-42 (jt8ev5-pwd) status -16

<3>[    4.814843] jt8ev5_probe_init_gpio: gpio_request jt8ev5_pwdn_gpio failed!

<3>[    4.821383] jt8ev5_sensor_i2c_probe probe faild--gpio requeset faild-----

<4>[    4.828253] jt8ev5: probe of 0-001e failed with error -14

<4>[    4.833934] msm_sensor_i2c_probe ov7692_i2c_probe called

<4>[    4.838888] msm_sensor_power_up: 649

<4>[    4.872194] msm_sensor id: 0x76  0x76

<3>[    4.875014] msm_eeprom_probe probe_fail

<6>[    4.879223] msm_sensor_register mctl_node_name[1] = video3

<4>[    4.885176] msm_sensor_power_down

<3>[    4.895716] ov7692_sensor_i2c_probe probe OK+++++++++++

<6>[    4.901484] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0

<7>[    4.908364] msm_batt_init: enter

<6>[    4.908416] __msm_rpc_connect: server not found 30000089:40001

<6>[    4.913811] __msm_rpc_connect: server not found 30000089:10001

<6>[    4.919461] __msm_rpc_connect: server not found 30000089:20001

<7>[    4.927909] msm_batt_enable_filter: enable vbatt filter: OK

<7>[    4.927933] msm_batt_update_psy_status: enter

<4>[    4.928563] BATT: AC Wall changer plugged in

<7>[    4.932531] shiyan:  every 10 min print battery_cap = 75 % 

<7>[    4.932551] BATT: Supply = ac

<7>[    4.932646] msm_batt_update_psy_status: exit

<6>[    4.932803] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)

<6>[    4.940686] msm_adc successfully registered

<6>[    4.944018] msm_adc successfully registered

<6>[    4.949299] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]

<6>[    4.957288] Bluetooth: HCI UART driver ver 2.2

<6>[    4.961401] Bluetooth: HCI H4 protocol initialized

<6>[    4.966083] Bluetooth: HCI_IBS protocol initialized

<6>[    4.972424] mmc0: SDCC Version: 0x00000000

<3>[    4.975981] mmc0: No card detect facilities available

<6>[    4.982561] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 80,0 dma 7 dmacrcri 12

<6>[    4.990019] mmc0: Controller capabilities: 0x00000001

<6>[    4.995043] mmc0: 8 bit data mode enabled

<6>[    4.998999] mmc0: 4 bit data mode disabled

<6>[    5.002993] mmc0: polling status mode disabled

<6>[    5.007574] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz

<6>[    5.018723] mmc0: Slot eject status = 0

<6>[    5.027823] mmc0: Power save feature enable = 1

<6>[    5.033759] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x284a0000

<6>[    5.044566] mmc0: DM cmd busaddr 0x284a0000, cmdptr busaddr 0x284b7f40

<6>[    5.056006] mmc1: SDCC Version: 0x00000000

<6>[    5.076348] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 56,272 dma 8 dmacrcri 6

<6>[    5.088934] mmc1: Controller capabilities: 0x00000001

<6>[    5.098294] mmc1: 8 bit data mode disabled

<6>[    5.106569] mmc1: 4 bit data mode enabled

<6>[    5.114846] mmc1: polling status mode disabled

<6>[    5.119828] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz

<6>[    5.127376] mmc1: Slot eject status = 0

<6>[    5.130509] mmc1: Power save feature enable = 1

<6>[    5.134868] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x284c0000

<6>[    5.141601] mmc1: DM cmd busaddr 0x284c0000, cmdptr busaddr 0x284d7f40

<6>[    5.148703] mmc2: SDCC Version: 0x00000000

<3>[    5.152376] mmc2: No card detect facilities available

<6>[    5.158889] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 58,0 dma 8 dmacrcri 7

<6>[    5.166351] mmc2: Controller capabilities: 0x00000001

<6>[    5.171218] mmc2: 8 bit data mode disabled

<6>[    5.175276] mmc2: 4 bit data mode enabled

<6>[    5.179321] mmc2: polling status mode disabled

<6>[    5.183658] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz

<6>[    5.189998] mmc2: Slot eject status = 0

<6>[    5.193723] mmc2: Power save feature enable = 1

<6>[    5.198213] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x28500000

<6>[    5.204998] mmc2: DM cmd busaddr 0x28500000, cmdptr busaddr 0x28517f40

<3>[    5.211761] PM_DEBUG_MXP:Enter gpio_led_probe

<3>[    5.216778] PM_DEBUG_MXP:pdata->num_leds = 1.

<3>[    5.220316] PM_DEBUG_MXP:pdata->leds[i]->gpio = 85.

<7>[    5.226559] Registered led device: button-backlight

<3>[    5.226578] PM_DEBUG_MXP:after create gpio led,ret =0

<3>[    5.231014] PM_DEBUG_MXP:Exit gpio_led_probe

<4>[    5.237471] WJP:enter init_emmc_info_proc 

<6>[    5.240731] mmc0: new high speed MMC card at address 0001

<5>[    5.246211] PM_DEBUG_MXP:Enter msm_pmic_led_probe.


<7>[    5.251318] Registered led device: red

<7>[    5.251446] Registered led device: green

<5>[    5.251508] PM_DEBUG_MXP:Exit msm_pmic_led_probe.


<6>[    5.256474] mmcblk0: mmc0:0001 SJS00M 3.64 GiB 

<6>[    5.262166] usbcore: registered new interface driver usbhid

<6>[    5.267033] usbhid: USB HID core driver

<6>[    5.272099]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 >

<6>[    5.280249] ashmem: initialized

<6>[    5.283414] logger: created 256K log 'log_main'

<6>[    5.287748] logger: created 256K log 'log_events'

<6>[    5.293154] logger: created 256K log 'log_radio'

<6>[    5.297218] logger: created 256K log 'log_system'

<6>[    5.302836] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0

<3>[    5.311299] msm_soc: ALSA MSM Mixer Setting

<6>[    5.315024] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok

<6>[    5.321413] __msm_rpc_connect: server not found 30000002:20001

<7>[    5.326399] msm_snd_rpc_connect failed (compatible VERS = 131073) 				 trying again with another API

<6>[    5.326891] oprofile: using arm/armv7

<6>[    5.330301] Netfilter messages via NETLINK v0.30.

<6>[    5.334819] nf_conntrack version 0.5.0 (6158 buckets, 24632 max)

<6>[    5.341936] ctnetlink v0.93: registering with nfnetlink.

<6>[    5.346461] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

<6>[    5.353451] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

<6>[    5.359451] xt_time: kernel timezone is -0000

<6>[    5.364329] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[    5.369083] arp_tables: (C) 2002 David S. Miller

<6>[    5.373496] TCP: cubic registered

<6>[    5.377851] NET: Registered protocol family 10

<6>[    5.384589] Mobile IPv6

<6>[    5.386199] ip6_tables: (C) 2000-2006 Netfilter Core Team

<6>[    5.391921] IPv6 over IPv4 tunneling driver

<6>[    5.397679] NET: Registered protocol family 17

<6>[    5.401408] NET: Registered protocol family 15

<6>[    5.406003] Bluetooth: RFCOMM TTY layer initialized

<6>[    5.410541] Bluetooth: RFCOMM socket layer initialized

<6>[    5.415809] Bluetooth: RFCOMM ver 1.11

<6>[    5.419383] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>[    5.424819] Bluetooth: BNEP filters: protocol multicast

<6>[    5.429963] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>[    5.436779] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1

<4>[    5.443696] mmc1: host does not support reading read-only switch. assuming write-enable.

<6>[    5.443714] ThumbEE CPU extension supported.

<5>[    5.443738] Registering SWP/SWPB emulation handler

<6>[    5.447616] clock_late_init: Removing enables held for handed-off clocks

<6>[    5.468276] cpufreq: cpu0 init at 600000 switching to 480000

<6>[    5.474971] mmc1: new high speed SD card at address b368

<6>[    5.479996] mmcblk1: mmc1:b368 NCard 1.83 GiB 

<6>[    5.480211] input: 7k_handset as /devices/virtual/input/input4

<3>[    5.490459] --keycode from A9(charger)

<3>[    5.490464]  	key:143 keycode:120

<6>[    5.496766]  mmcblk1: p1

<3>[    5.499133] --keycode from A9(charger)

<3>[    5.499138]  	key:143 keycode:255

<6>[    5.508259] msm_setup_fiq_handler : msm7k fiq setup--done

<4>[    5.513316] TAOS:  taos_probe begin

<4>[    5.516721] taos chip id is:0x29

<3>[    5.519503] TAOS: taos_probe() - i2c smbus block data functions unsupported

<6>[    5.526498] input: light_sensor as /devices/virtual/input/input5

<4>[    5.537494] Rambo::light sensor will pwr down 

<4>[    5.546528] i2c-core: driver [taos] using legacy suspend method

<4>[    5.551594] i2c-core: driver [taos] using legacy resume method

<6>[    5.563058] rs30000048 rs30000048.262144: setting system clock to 2013-05-30 14:52:20 UTC (1369925540)

<6>[    5.576969] ALSA device list:

<6>[    5.584016]   #0: msm-audio

<6>[    5.591406] Freeing init memory: 216K

<3>[    5.606271] init: invalid uid 'fm_radio'

<3>[    5.713859] init: cannot open '/initlogo.rle'

<3>[    5.717843] init: Unable to open persistent property directory /data/property errno: 2

<3>[    5.726693] enable_store: android_usb: already disabled

<3>[    5.726716] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<6>[    5.741464] adb_open

<6>[    5.742759] adb_bind_config

<6>[    6.015101] android_work: android_work: sent uevent USB_STATE=CONNECTED

<4>[    6.064144] recovery used greatest stack depth: 5556 bytes left

<6>[    6.092973] mipi_dsi_ahb_ctrl: ahb clks already ON

<6>[    6.096873] mipi_dsi_clk_enable: mipi_dsi_clks already ON

<6>[    6.172821] msm_hsusb msm_hsusb: PCI intr missedset speed explictly

<7>[    6.645089] msm_batt_update_psy_status: enter

<7>[    6.646101] shiyan:  every 10 min print battery_cap = 75 % 

<7>[    6.646113] BATT: Supply = ac

<7>[    6.646128] msm_batt_update_psy_status: exit

<7>[    6.743451] msm_batt_update_psy_status: enter

<7>[    6.744413] shiyan:  every 10 min print battery_cap = 75 % 

<7>[    6.744423] BATT: Supply = ac

<7>[    6.744434] msm_batt_update_psy_status: exit

<4>[    6.744441] doumingming:usb_chg_detect chg_type:0 

<6>[    8.777621] android_usb gadget: high-speed config #1: android

<6>[    8.782626] 

<6>[    8.782629] Charger Type: STD DOWNSTREAM PORT

<7>[    8.789739] msm_batt_update_psy_status: enter

<4>[    8.790401] BATT: USB charger plugged in

<7>[    8.793881] shiyan:  every 10 min print battery_cap = 75 % 

<7>[    8.793891] BATT: Supply = usb

<7>[    8.793908] msm_batt_update_psy_status: exit

<6>[    8.843001] android_work: android_work: sent uevent USB_STATE=CONFIGURED

<3>[   10.486911] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[   11.629941] msm_batt_update_psy_status: enter

<7>[   11.631351] shiyan:  every 10 min print battery_cap = 75 % 

<7>[   11.631363] BATT: Supply = usb

<7>[   11.631378] msm_batt_update_psy_status: exit

<4>[05-30 14:52:30.039] adbd (109): /proc/109/oom_adj is deprecated, please use /proc/109/oom_score_adj instead.

<3>[05-30 14:52:30.436] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:52:31.551] msm_batt_update_psy_status: enter

<7>[05-30 14:52:31.553] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:52:31.553] BATT: Supply = usb

<7>[05-30 14:52:31.553] msm_batt_update_psy_status: exit

<3>[05-30 14:52:35.449] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:52:36.536] msm_batt_update_psy_status: enter

<7>[05-30 14:52:36.537] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:52:36.538] BATT: Supply = usb

<7>[05-30 14:52:36.538] msm_batt_update_psy_status: exit

<3>[05-30 14:52:40.462] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:52:41.521] msm_batt_update_psy_status: enter

<7>[05-30 14:52:41.522] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:52:41.522] BATT: Supply = usb

<7>[05-30 14:52:41.523] msm_batt_update_psy_status: exit

<3>[05-30 14:52:45.474] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:52:46.506] msm_batt_update_psy_status: enter

<7>[05-30 14:52:46.507] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:52:46.507] BATT: Supply = usb

<7>[05-30 14:52:46.507] msm_batt_update_psy_status: exit

<3>[05-30 14:52:50.487] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:52:51.491] msm_batt_update_psy_status: enter

<7>[05-30 14:52:51.492] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:52:51.492] BATT: Supply = usb

<7>[05-30 14:52:51.493] msm_batt_update_psy_status: exit

<3>[05-30 14:52:55.500] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:52:56.476] msm_batt_update_psy_status: enter

<7>[05-30 14:52:56.477] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:52:56.477] BATT: Supply = usb

<7>[05-30 14:52:56.477] msm_batt_update_psy_status: exit

<3>[05-30 14:53:00.513] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:01.461] msm_batt_update_psy_status: enter

<7>[05-30 14:53:01.462] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:53:01.462] BATT: Supply = usb

<7>[05-30 14:53:01.462] msm_batt_update_psy_status: exit

<3>[05-30 14:53:05.526] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:06.446] msm_batt_update_psy_status: enter

<7>[05-30 14:53:06.447] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:53:06.447] BATT: Supply = usb

<7>[05-30 14:53:06.447] msm_batt_update_psy_status: exit

<3>[05-30 14:53:10.538] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:11.444] msm_batt_update_psy_status: enter

<7>[05-30 14:53:11.445] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:53:11.445] BATT: Supply = usb

<7>[05-30 14:53:11.445] msm_batt_update_psy_status: exit

<3>[05-30 14:53:15.551] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:16.416] msm_batt_update_psy_status: enter

<7>[05-30 14:53:16.417] shiyan:  every 10 min print battery_cap = 75 % 

<7>[05-30 14:53:16.417] BATT: Supply = usb

<7>[05-30 14:53:16.417] msm_batt_update_psy_status: exit

<3>[05-30 14:53:20.564] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:21.401] msm_batt_update_psy_status: enter

<7>[05-30 14:53:21.402] BATT: Supply = usb

<7>[05-30 14:53:21.402] msm_batt_update_psy_status: exit

<3>[05-30 14:53:25.577] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:26.386] msm_batt_update_psy_status: enter

<7>[05-30 14:53:26.387] BATT: Supply = usb

<7>[05-30 14:53:26.387] msm_batt_update_psy_status: exit

<3>[05-30 14:53:30.590] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:31.371] msm_batt_update_psy_status: enter

<7>[05-30 14:53:31.372] BATT: Supply = usb

<7>[05-30 14:53:31.373] msm_batt_update_psy_status: exit

<3>[05-30 14:53:35.603] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:36.356] msm_batt_update_psy_status: enter

<7>[05-30 14:53:36.357] BATT: Supply = usb

<7>[05-30 14:53:36.357] msm_batt_update_psy_status: exit

<6>[05-30 14:53:39.888] rmt_storage_event_open_cb: open callback received

<6>[05-30 14:53:39.893] open partition /boot/modem_fs1 handle=1

<6>[05-30 14:53:39.899] rmt_storage_event_user_data_cb: send user data callback received

<6>[05-30 14:53:39.907] rmt_storage_event_open_cb: open callback received

<6>[05-30 14:53:39.912] open partition /boot/modem_fs2 handle=2

<6>[05-30 14:53:39.919] rmt_storage_event_user_data_cb: send user data callback received

<6>[05-30 14:53:39.926] rmt_storage_event_write_iovec_cb: write iovec callback received

<3>[05-30 14:53:40.616] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:41.341] msm_batt_update_psy_status: enter

<7>[05-30 14:53:41.342] BATT: Supply = usb

<7>[05-30 14:53:41.342] msm_batt_update_psy_status: exit

<3>[05-30 14:53:45.629] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:46.326] msm_batt_update_psy_status: enter

<7>[05-30 14:53:46.327] BATT: Supply = usb

<7>[05-30 14:53:46.327] msm_batt_update_psy_status: exit

<3>[05-30 14:53:50.642] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:51.311] msm_batt_update_psy_status: enter

<7>[05-30 14:53:51.312] BATT: Supply = usb

<7>[05-30 14:53:51.312] msm_batt_update_psy_status: exit

<3>[05-30 14:53:55.654] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:53:56.296] msm_batt_update_psy_status: enter

<7>[05-30 14:53:56.297] BATT: Supply = usb

<7>[05-30 14:53:56.297] msm_batt_update_psy_status: exit

<3>[05-30 14:54:00.667] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:54:01.281] msm_batt_update_psy_status: enter

<7>[05-30 14:54:01.282] BATT: Supply = usb

<7>[05-30 14:54:01.282] msm_batt_update_psy_status: exit

<3>[05-30 14:54:05.680] init: cannot execve('/sbin/rmt_storage'): No such file or directory

<7>[05-30 14:54:06.266] msm_batt_update_psy_status: enter

<7>[05-30 14:54:06.267] BATT: Supply = usb

<7>[05-30 14:54:06.267] msm_batt_update_psy_status: exit